As you know, laser cutting machines are widely used in industry

As you know, laser cutting machines are widely used in industry, and today, due to the pervasiveness of these devices and their low cost, they have been able to play a colorful role in the economics of households or small businesses.

Many of the replicas, boards, handicrafts, and decorations you see on the market come from these devices.
But the point is, what machine do we need to start a laser cutting machine?
Gold laser engraving and engraving machine
The fiber marking machine is mostly used for engraving and cutting gold. The power of these devices is generally 2 to 50 watts. You can cut and engrave gold sheets with this machine. These machines have the ability to engrave circular metals even inside the ring and bangle. The price of these devices is somewhat expensive but is a major development in gold making.

With this machine you can engrave on all kinds of metals with high speed and also can cut all kinds of gold, steel and etc. sheets up to 0.8 mm in diameter.

We offer fine work such as gold or engraving and fine cutting, fiber engraving and laser cutting.

The desk surface of this machine is small at about 30 by 40 cm and the cutting and engraving area is about 30 by 30 cm and is not suitable for cutting and engraving on large sheets.

Larger sheets up to 1 mm in diameter can be used with co2 laser cutting machines with 150 watt tubes, which can be mounted on tables 90 x 130 cm or larger.

Laser cut machine, leather and cardboard for making decorative accessories
One of the businesses that can have a good market is the manufacture of decorative accessories with wool and leather.

You can also make a 30 x 40 cm desktop laser cutting machine at a minimum cost. This machine is suitable for low-end home work, and because of its low lubrication power, materials other than wool and synthetic leather and similar materials cannot be used much, but it is suitable for engraving on advertising equipment.

But we recommend buying a desk with a desk at least 60 by 90 cm with a 80 watt tube and still better than a 90 by 130 watt with a 100 watt tube which has a lot of cutting and engraving capabilities and almost all you need for one. Home production or workshop work.

Laser cutting machine for cutting wood and Plexiglas

As mentioned, one of the most common applications of laser cutting and engraving is to make a variety of wooden replicas, decorative accessories and paneling.

We again offer the purchase of a 90 x 130 cm machine with a 100 watt tube, Model RT-1390.

With this laser machine you can cut MDF sheets up to 7 mm in diameter and Plexiglass up to 20 mm in diameter. It should be noted that no laser cutting machine is recommended for cutting wood more than 7 mm in diameter as it will burn wood or cut edges.

If you are planning to cut wood sheets more than 7mm in diameter, we recommend buying a CNC machine for cutting wood.

Important Points in Buying a Laser Cutting Machine

The most important parts of a laser cutting machine include the following:

Laser tube
motherboard
Lenses and mirrors
Rail and cabin
Device table
chiller
Laser tube

Reci laser laser tube is the most popular brand of laser tube in Iran. Current power is 40, 80, 100 and 130 watts.

We recommend buying a 100 watt Reci brand laser tube machine because it is suitable for both engraving and engraving.

Note also that as laser power increases, its etching accuracy decreases, and vice versa. That's why we recommend the 100 W4 Series tube, which is suitable for both cutting and engraving.

motherboard

There are a variety of motherboards on the market, but we recommend the RDC-6332 or RDC 6442 because they are the new generation of motherboards, featuring a color graphical monitor and the ability to install flash memory and lane ports directly, as well as pre-work monitoring. They have cutting and engraving operations on their screens, and their main advantage is their automatic error ptfe bushings suppliers detection system, which makes them very easy to work with.

Lenses and mirrors

There are a variety of lenses and mirrors available in the market, but we offer silicone mirrors and crystal clear orange lenses. The best brands in the market are American lenses and mirrors, or US licensed.  brands are also popular in Iran for good prices, but they cannot be trusted by the brand or manufacturer in this market fraud because they easily label and label world-famous companies on any commodity and sell them at a discount. .

We recommend purchasing the device from reputable and reputable companies that do not lose credibility with counterfeit products for a little extra profit.

Rail & Cab:

The best rails and cabins available on the market are Taiwan, Japan and America. We offer THK Japan Rail. There is still a lot of fraud in the market, and we only recommend buying from well-known companies or their exclusive dealers in Iran.

Device table:

Device tables are available in a variety of sizes, the most common being 30 * 40 - 60 * 90 - 90 * 130 - 130 * 180 - 250 * 320.

For small and home production jobs we offer a machine with a 90 x 130 table

Macro level or social level, many scholars

Macro level or social level, many scholars, including the most basic government officials may also have discussed, GDP is mainly driven by FDI investment in export income gap is very large, aging population, look at my level is more concerned about In fact, both 's basic national conditions of structural change is multi-layered and diverse, and industrial structural changes are very common in all developing countries will discuss the formula, the regional economic change is a big country there is no doubt a big problem, changes in urban and rural structure Urbanization is the urban-rural structure as long as the change in ownership structure change is enterprise reform. Why do I add "diversity" the word theory is generally urban-rural dual structure, and the future, when perhaps the binary is not enough, perhaps at least triple, the regional economic structure is ternary, the industrial structure to a little more complicated to The first macro level, simply give me a map, you can find a lot of our more detailed analysis or data, the most basic view, in fact, is to get a phenomenon, we can observe, in the past many years is the most important investment-led The.

Income not mentioned just now that some guests, the per capita GDP of these pillars of green, from the height of terms in the middle, than it employed in urban units higher remuneration than the average GDP, per capita in rural areas to fall into the blue urban residents household disposable income, the average labor compensation per capita disposable income into something worse? The largest is taxes, of course, plus pay for Social Security, Medicare, etc., in general, rising slope, the average rate of increase of labor compensation is very large, the slope is high, very steep, but much weaker disposable income in this, so a big part of the tax actually removed, a serious imbalance in the distribution of income, 's Gini coefficient of 0.28 from the beginning of reform and opening up to 0.48 in 2007. The past two years has exceeded 0.5, the World Bank report shows, U.S. 5% of the population control 60% of the wealth, while  is 1% of households control 41.4% of the wealth of the world,  has become the most serious global polarization state one.

Economic factors do not speak here, and an aging population, have mentioned Professor Wei Shangjin very unique demographic imbalance in sex ratio, aging of the population to become very real problem, has become a very real factor, we can see with this for the most basic background, the rise in labor costs, which is an inevitable trend, it has a passive side to side is also active, the central economic work next twelve five people to enhance the economic level, that the labor costs, an aging population means You supply the labor force with less and less, less and less supply you have to pay higher wages to the labor force employment is possible, this is the most basic supply and demand, the State Council Development Research Center of Jiange more than 3,000 villages in  research, found that more 230 million surplus rural labor to cities, accounting for 47.9% of the total rural labor force, while only 5.1% of the remaining 24.81 million labor force, is basically difficult to transfer out of the sick and elderly . I am also on the EMBA class last week, he said I was in Shanghai to do agriculture, growing vegetables in Shanghai a couple who add up the average age of the two 150-year-old demographic which has the concept of the demographic dividend can be reflected in the dependency ratio relatively low, the specific data is not so important here to have look, the population dependency ratio is in fact the population of each raising the number of working-age non-working age population, 2008 population age structure, 0-14-year-old 25,166 million, accounting for 19% ,15-59 years old 91,647 million, accounting for 69% of the 15989 people aged over 60, accounting for 12%, of which 10 956 people aged over 65, accounting for 8.3.

Baby Boomers community is the demographic dividend and then down into the population balance, the first phase of Japan's infancy, the next just after the collapse of the Japanese economy, Japan's economy in 1991, ah lost 20 consecutive years, 's demographic dividend forecasts into 2015, the population balance .  is not repeating the mistakes of the Japanese economy, the demographic dividend may turn the population balance, is exactly zero change in the Japanese economy from the industry point of retaliation, all the contradictions journal when you turn up to solve, you do not cure conflict indicators continue to accrue, When the accumulated total of the outbreak, many people think is 2012. Some people say that buying gold is a way, that gold bought into the chicken coop, EMBA students may not watch TV and see potential to know, why buy gold on a chicken coop.

Third, the transformation of economic development is the most fundamental constraints faced by our long-term, staff and resource constraints, in fact, there are environmental constraints, has become increasingly unbearable, all things are beginning to aggregate into short-term conflicts, changes wholesale bronze bushing in industrial structure is a factor, technological progress and innovation in 's economic development is a fundamental factor in the long-term, the  economy can not be sustained, and the next decade or two, then remained crucial to sustainable development, Urbanization is an important topic, can narrow the income gap, no doubt very important, the system becomes very important to push the bear.

's price level to catch up with the United States but also for 40 years, now runs anywhere in the U.S. and Europe, sold in the supermarket, "" definitely cheaper than they are, as long as "Made in " cheaper than domestic, and perhaps  Income the level of per capita, even 20,30 years to catch up with the United States, not necessarily 40 years, but the price to more than U.S. and Europe, how to explain, the resource gap in accordance with the 2015 National Mineral Resource Planning, according to the current energy extraction and consumption speed of 45 in 2020 the shortage of 19 kinds of minerals, 60% dependence on foreign oil, iron ore 40%.

Evolution and adjustment of industrial structure should increase the proportion of tertiary industry, but also with our relationship pricing structure. To become the dominant post-industrialization of  and Shanghai, it does not achieve this. This is the 2009 proportion of the three products.

Is more important for future long-term development, technological progress and innovation is of fundamental interest. Stan Shih, Taiwan's entrepreneurs, the more upstream industrial chain for added value asked him, the more higher value-added downstream, manufacturing is the lowest in the middle, which is "Made in " position.

Since the crisis, the basic trend of the market economy is not good to the Government to intervene, this is the most basic ideas, industrial policy is back, but he brought the question is, if all issues are pushed back by the short-term policy like I said, will continue to accumulate, to what extent the accumulation of the outbreak, the exact time is not know, but it is predictable. Cairns has a famous saying "In the long run we are all dead," you are not aware of any famous quote, "I die even if Hongshuitaotian" two words seemed almost, if not long-term vision, do not take into account what would happen to the future long-term development in  entirely focused on short-term policy, then the long run we will be punished.

Corporate Social Responsibility in the EU and the Position of the European Machine Tool Industry

In October 2020, the Council of the EU adopted the amended Directive on disclosure of nonfinancial and diversity information by certain large companies and groups. Large companies with more than 500 employees will hereafter be required to disclose certain non-financial information in their annual management reports. Approximately 6000 large companies and groups across the EU will be affected.

According to the new Directive, companies concerned will need to disclose information on policies, risks and outcomes as regards environmental matters, social and wholesale bronze bushing employee-related aspects, respect for human rights, anti-corruption and bribery issues, and diversity in their board of directors. The European Commission expects that the Directive will generate significant benefits both for individual companies and the society by increasing the awareness of managing environmental and social challenges in an effective and accountable way. It is predicted that reporting will help customers, suppliers and citizens to make informed choices and develop further relations with companies with a positive social and environmental impact.

Being an SME-dominated sector - 80% of European machine tool companies are an SME - the Directive will not affect the European machine tool industry directly. Nevertheless, machine tool builders hold a strategic place in the manufacturing value chain and supply equipment to large European companies from automotive, aerospace, construction equipment, energy generation and other sectors which are covered by the Directive. It is, therefore, expected that machine tool builders will face increasing requirements from clients to provide information and documentation as regards their business and supply chain practices, products and processes.

The European machine tool industry is a key enabling sector which underpins the competitiveness of European manufacturing thanks to the sustainable and innovative production solutions it provides to a wide array of industries. The sector is indeed globally known for its highperformance, and resource- and energy-efficient products which ensure a high level of health and safety in the workplace. In addition to individual company practices, there are already several sectoral initiatives, such as Blue Competence, that communicate companies' sustainability practices via a common platform to stakeholders.

To further prepare the sector for the forthcoming challenges, CECIMO launched the EU-funded DESIGN-MTS project in 2013. The project aims at developing a multi-stakeholder platform in the field of CSR and sustainability for the machine tool sector.

Over the past year, the project consortium has identified areas of relevance in CSR for the machine tool industry and its value chain, namely employability, demographic changes, workplace challenges, environmental sustainability and fair operating practices. The project consortium has mapped challenges and opportunities in each area and has assessed the level of awareness and best practices in the sector. The findings have been disseminated through a series of events as well as on the online project platform. A major objective of the project is to better inform SMEs as regards the fundamental concepts of CSR and related international standards, and to help them better prepare to respond to growing requirements of customers. Therefore, online training modules have recently been launched on the project website, which offer free-of-charge courses to companies and trade associations. "People", "environment" and "fair operating practices" are the core areas that courses focus on.